Hydraulic Brakes Maintenance And Repair; Manual Bleeding The Brakes - Daewoo Nubira Owner's Manual

4A – 10IHYDRAULIC BRAKES
MAINTENANCE AND REPAIR
ON–VEHICLE SERVICE

MANUAL BLEEDING THE BRAKES

1. Remove the booster reserve by applying the brakes
several times with the engine OFF until all the re-
serve is depleted.
Important : If the master cylinder is known or suspected
to have air in the bore, then it must be bled before any
wheel cylinder or caliper is bled.
2. Fill the master cylinder reservoir with brake fluid.
Keep the master cylinder at least one–half full of
fluid during the bleeding operation.
3. Disconnect the front brake line(s) at the master cyl-
inder.
4. Allow the brake fluid to fill the master cylinder until it
begins to flow from the front pipe connector port.
5. Connect the front brake line(s) to the master cylin-
der.
Tighten
Tighten the brake lines to 16 NSm (12 lb–ft).
DAEWOO V–121 BL4