Thermostat Installation - Daewoo Nubira Owner's Manual

DAEWOO V–121 BL4
ENGINE COOLING 1D – 9
Installation Procedure
1. Install the thermostat into the thermostat housing
by pressing the thermostat mounting flange down-
ward and then rotating the flange counterclockwise.
Rotate the thermostat mounting flange until it is
seated in the thermostat housing recesses.
2. Coat the sealing surface of a new O–ring seal with
Lubriplate±.
3. Install a new O–ring seal into the recess in the ther-
mostat housing.
4. Install the thermostat housing to the cylinder head.
5. Secure the thermostat housing to the cylinder head
with the mounting bolts.
Tighten
Tighten the thermostat housing mounting bolts (2.0L
DOHC) to 15 NSm (11 lb–ft).
6. Connect the upper radiator hose to the thermostat
housing.
7. Secure the upper radiator hose to the thermostat
housing with a hose clamp.
8. Refill the engine cooling system. Refer to "Draining
and Refilling the Cooling System" in this section.