Daewoo Nubira Owner's Manual page 608

9P – 8IDOORS
Step
9 Check the operation of the windows.
Is the driver's side window the one that is inoperative
?
10 Replace the driver's side door power window switch.
Is the repair complete
11
1. Make sure the window lock switch on the driv-
er's side door is not engaged.
2. Turn the ignition ON.
3. Backprobe to check the voltage at terminal 5
(DK BLU) of the driver's side door power win-
dow switch.
Is the voltage equal to the specified value ?
12
1. Make sure the window lock switch on the driv-
er's side door is not engaged.
2. Turn the ignition ON.
3. Check the voltage at terminal 2 (PNK) of the
window switch connector for the inoperative
window.
Is the voltage equal to the specified value ?
13 Repair the open wire between the terminal 2 of the
window switch and the driver's side door power win-
dow switch.
Is the repair complete
14
1. At the inoperative window switch, use an ohm-
meter to check the continuity between ground
and terminal 4.
2. At the inoperative window switch, use an ohm-
meter to check the continuity between ground
and terminal 1.
Are the continuities equal to the specified value ?
15 Replace the power window switch.
Is the repair complete
16 If one of the window switch wires tested in Step 14
does not show continuity with ground, use an ohm-
meter to test the continuity of that wire between the
window switch and the driver's side door power win-
dow switch.
Is the continuity equal to the specified value ?
17 Replace the window switch for the inoperative win-
dow.
Is the repair complete ?
18 Repair the open circuit between the window switch
and the driver's side power window switch.
Is the continuity equal to the specified value ?
Action Value(s) Yes
Go toStep 10
System OK
11––14 v Go toStep 12
11––14 v Go toStep 14
System OK
11––14 v Go toStep 15
System OK
[ 0 W
Go toStep 17
System OK
[ 0 W
Go toStep 21
No
Go toStep 11
Go toStep 10
Go toStep 13
Go toStep 16
Go toStep 18
Go toStep 20
DAEWOO V–121 BL4