Clutch Release Cylinder Assembly Removal - Daewoo Nubira Owner's Manual

5C0 – 20ICLUTCH
4. Coat the piston rod bolt with multi–purpose grease.
5. Install the piston rod clevis, the piston rod bolt, and
the locking washer onto the clutch pedal.
6. Bleed the air. Refer to "Air Bleeding" in this section.
7. Adjust the clutch pedal. Refer to "Clutch Pedal Ad-
justment " in this section.
8. Fill the reservoir with clutch/brake fluid up to the
MAX level.
9. Connect the negative battery cable.
CLUTCH RELEASE CYLINDER
ASSEMBLY
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the bolt and disconnect the hose from the
clutch release cylinder.
3. Remove the clutch release cylinder bolts and re-
move the release cylinder from the transaxle.
DAEWOO V–121 BL4