Oil Pan Removal - Daewoo Nubira Owner's Manual

1C – 36IDOHC ENGINE MECHANICAL
13. Install the serpentine accessory drive belt. Refer to
Section 2E, Tires and Wheels.
14. Install the right front splash shield.
15. Install the right front wheel. Refer to Section 6B,
Power Steering Pump.
16. Install the air filter housing.
17. Install the air filter housing bolts.
Tighten
Tighten the air filter housing bolts to 8 NSm (71 lb–in).
18. Connect the air intake tube to the throttle body.
19. Connect the breather tube to the valve cover.
20. Connect the intake air temperature sensor connec-
tor.
21. Connect the negative battery cable.
OIL PAN
Removal Procedure
1. Disconnect the negative battery cable.
2. Drain the engine oil from the engine crankcase.
3. Disconnect the post–converter heated oxygen sen-
sor.
4. Remove the auxiliary catalytic converter upper
flange nuts from the exhaust manifold and the sup-
port bracket bolts.
5. Remove the front muffler pipe retaining nuts from
the main catalytic converter.
6. Remove both catalytic converters as a unit.
DAEWOO V–121 BL4