Automatic Feeder Cleaning
If your originals have black streaks or appear dirty after scanning them through the feeder, perform an automatic feeder
cleaning for the rollers of the feeder.
1
1
Press
(Settings/Registration) .
2
2
Press [Adjustment/Maintenance] → [Maintenance] → [Clean Feeder] .
3
3
Place 10 sheets of blank paper into the feeder → press [Start] .
It■takes■approximately■20■seconds■to■clean■the■feeder.
Use■normal LTR■size■paper.
When■cleaning■is■complete,■try■scanning■again.
• Feeder Cleaning cannot be performed during printing.
• To cancel feeder cleaning while it is in progress, press [Cancel].
96