Clean The Original Scanning Area Prompt - Canon imageRUNNER 6570 Reference Manual

Clean the Original Scanning Area Prompt

You can use the Cleaning Display for the Original Scanning Area mode to prompt
you to clean the scanning area when the machine detects streaks or stains. If the
feeder is not clean, the machine will scan and print dust and grime on the output.
The Clean the Original Scanning Area Prompt appears when originals are placed in
the feeder. For instructions on cleaning the feeder's scanning area, see "Manual
Feeder Cleaning," on p. 8-39.
NOTE
The default setting is 'On'.
1
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-24.
2
Press [▼] or [▲] until [Cleaning Display for the Original
Scanning Area] appears ➞ press [Cleaning Display for the
Original Scanning Area].
(Additional Functions) ➞ [Common Settings].
Specifying Common Settings
4
4-91