Required Media Sizes For Printing - Roland ColorCamm PC-12 User Manual

*1 Other conditions are diameter of 110 mm (4-5/16 in.) or less and weight of 2.0 kg (4.4 lb) or less.
*2 May be limited by the program.
Feed accuracy is guaranteed up to 500 mm (19-11/16 in.).
*3 At operating environment :
Media types :
Data size :
Windows-based driver setting : prefeed enabled
Excluding effects due to crooked media or media expansion or contraction
*4 No lamination
*5 ±0.25 mm (±0.0098 in.) or less when using wax-ink gold or silver special color

8.2 Required Media Sizes for Printing

The media used for printing must be at least as large as the printing size plus the top and bottom margins, left and right margins, crop-mark
printing areas, and page spacing. The sizes of the top and bottom margins, left and right margins, and crop-mark printing areas are fixed and
cannot be changed.
Sheet Material with No Crop-mark Printing
Left margin 3.4 mm (3/16in.)
Direction of printing
Top margin 13 mm (9/16 in.)
Printing length
Bottom margin 31 mm (1-1/4 in.)
25 °C and 50% RH
genuine resin-use media (vinyl; white), wax-use media (synthetic paper; white)
500 mm (19-11/16 in.) Media-feed direction
Carriage-movement direction 300 mm (11-13/16 in.)
Right margin 3.4 mm (3/16in.)
Printing width
Sheet Material with Crop-mark Printing
Left margin 3.4 mm (3/16in.)
Direction of printing
Top margin 13 mm (9/16 in.)
Crop-mark printing area 21.8 mm (7/8 in.)
Printing length
/Crop-mark printing area 13 mm (9/16 in.)
Bottom margin 31 mm (1-1/4 in.)
Part 8 Specifications
Right margin 3.4 mm (3/16in.)
Printing width
91