Micro Feed - Roland ColorCamm PC-12 User Manual

Adjusting a [Media Type] Item
For each media type, you can adjust the density as well as adjusting the cutting position to ensure that the printing
and cutting positions are not misaligned.
The settings do not return to their defaults even when you go to the [Print Settings] page and click [Restore Defaults].
The default values are all "0" (zero).
1 Select the [Media Type] item you want to use as a basis.
Click [Adjustment].
2
3 When the [Media Settings] dialog box appears, use the
sliders to adjust the items you want to modify.
After you have finished making the adjustments, click
[OK].

Micro Feed

This adjusts the line pitch of the media when [Printing & Cutting] or [Printing] is selected. If the line pitch is
too wide and gaps appear, set this to a minus value, If the line pitch is too narrow and overlap occurs, set this
to a positive value.
The amount of adjustment when set at the maximum value of 10 is approximately 0.1 mm (0.004 in.) .
* Distance accuracy is not guaranteed when adjustment has been made using [Micro Feed].
Density
This adjusts the density.
Increasing this larger makes the image darker, and reducing it makes the image lighter.
Cutting Feed
This adjusts the amount of feed for cutting.
Making this larger expands the entirety of cutting in the direction of feed, and making it smaller reduces the
entirety of cutting.
The reference point for expanding or reducing if the top portion of the program's work area.
The amount of adjustment when set at the maximum value of 50 is approximately 1.5%.
* Distance accuracy is not guaranteed when adjustment has been made using [Cutting Feed].
When the line pitch
is too wide
Make the value smaller.
When cutting is
reduced in the
direction of feed
Make the value larger
Part 5 Many Kinds of Printing and Settings
When the line pitch
is too narrow
Make the value larger.
when cutting is
expanded in the
direction of feed
Make the value smaller.
61