What You Can Do; Easy Printing And Cutting From Compatible Programs - Roland ColorCamm PC-12 User Manual

Part 1 Getting Started

1.2 What You Can Do

Easy Printing and Cutting from Compatible Programs

With the PC-12, you can make labels, stickers, and other items by following a procedure like the one below.
1
Use a compatible program to lay out photos, figures, and
text, then draw the lines for cutting.
Use vector data to make the line for cutting. You can
perform printing using either bitmap data or vector data.
Operating system
®
Microsoft Windows
Compatible programs
® ®
Adobe Illustrator 7.0/8.0/9.0, CorelDRAW
2
Perform output in the same way as for an ordinary printer.
Use the special printer driver to specify the media and ink-
ribbon cartridges for printing, or to specify the settings for
cutting.
For more information, see "Part 4 Steps Up Through
Printing and Cutting."
3
After printing, cutting is performed automatically. Because
you can even cut smooth curves, it's also easy to make
sticker stencils and cut-out text.
10
® ®
95/98/Me, Windows NT 4.0/2000
®
7/8/9