Part 5 Many Kinds Of Printing And Settings; Many Kinds Of Printing - Roland ColorCamm PC-12 User Manual

Part 5 Many Kinds of Printing and Settings

Part 5 Many Kinds of Printing
With the PC-12, you can perform printing using a wide variety of print modes and printing methods depending on the type of document to
print, the type of media used, and the ink-ribbon cartridges.
You make these settings at the [Roland PC-12] dialog box. For information on how to display the [Roland PC-12] dialog box, see "4.2 Output
from a Compatible Program."
NOTICE For the media loaded on the PC-12 and the ink-ribbon cartridges installed in the PC-12, be sure to use the same items
described in the setting in the [Roland PC-12] dialog box.
- When you print small shapes or text on wax-use media using special-color, gold, or silver ribbon, the printed results
may be faint. In some cases this can be improved by enlarging the line width of the shapes or the size of the text.
- When you perform printing on resin-use media using special-color, red, or blue ribbon, then depending on
themedia, faint colors may become visible in areas that are supposed to be unprinted, due to slight dragging of the
printing heads.

5.1 Many Kinds of Printing

This section describes what printing methods are available and what settings, conditions, and other requirements are necessary to execute
them.
To set the printing method, go to the [Roland PC-12] dialog box and use the [Print Settings] page.
[Output Data]
[Document Type]
[Media Type]
How to read the lists of setting items in "Many Kinds of Printing"
* When more than one choice is given for a setting item, you can select and one of them.
* Depending on the setting items you choose, the availability of other setting-item selections may change.
* Required settings and conditions are indicated by
50
and Settings
Settings on the [Print Settings] page
(shading).
[Print Mode]
[Print Using]
[Select Ink Cartridge(s)]