Replacing The Blade - Roland ColorCamm PC-12 User Manual

Insert until the collar of the blade holder lies
flush against the top of the hole.
Turn the tool-carriage screw clockwise to secure in place.
5
6 Close the front cover gently while supporting the left and
right sides of the cover with your hands. Make sure the
inside lock has engaged.

Replacing the Blade

When replacing the blade, remove the blade holder from the tool carriage.
When adjusting the blade tip as well, first remove the blade holder, then adjust the blade tip.
Removing the Blade Holder
1 Switch off the power to the PC-12.
Press the front-cover eject button, and after the inside
2
lock has been released, catch the front cover with your
hand and open it gently.
3 Turn the tool-carriage screw counterclockwise to loosen
it.
Not OK
4 Take the blade holder out of the tool carriage.
Part 3 Getting Ready
OK
Front-cover eject
button
33