Output From A Compatible Program; Page Settings - Roland ColorCamm PC-12 User Manual

Part 4 Steps Up Through Printing and Cutting

4.2 Output from a Compatible Program

This section describes the steps up through performing output to the PC-12 of data created using a program that is compatible with the PC-12.
NOTICE Set the line width for the printing data created with the program to 0.15 mm or more.
If it is set to less than 0.15 mm, printing results may be poor.

Page Settings

Make the settings for the size of the media you are going to use for output.
1 Start the PC-12-compatible program.
The explanations in this section use Adobe Illustrator
as an example.
2 Open the data you want to output.
Alternatively, create new data.
From the [File] menu, choose [Document Setup].
3
4 The [Document Setup] dialog box appears.
Click [Page Setup].
The [Print Setup] dialog box appears.
5
Click [Properties].
42
®
8.0