Figure 66 Menu 22 - Snmp Configuration; Table 27 Snmp Configuration Menu Fields - Nortel BCM50a Configuration Manual

138 Chapter 12 SNMP Configuration
Figure 66 Menu 22 – SNMP Configuration
SNMP:
Table 27

Table 27 SNMP Configuration Menu Fields

Field
Get Community
Set Community
Trusted Host
Trap
Community
Destination
N0115791
Menu 22 - SNMP Configuration
Get Community=
Set Community=
Trusted Host= 0.0.0.0
Trap:
Community=
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
describes the SNMP configuration parameters.
Description
Type the Get community, which is the password for
the incoming Get- and GetNext requests from the
management station.
Type the Set community, which is the password for
incoming Set requests from the management
station.
If you enter a trusted host, your BCM50a Integrated
Router will only respond to SNMP messages from
this address. A blank (default) field means your
BCM50a Integrated Router will respond to all SNMP
messages it receives, regardless of source.
Type the Trap community, which is the password
sent with each trap to the SNMP manager.
Type the IP address of the station to send your
SNMP traps to.
After you complete this menu, press [ENTER] at the
prompt "Press [ENTER] to confirm or [ESC] to
cancel" to save your configuration or press [ESC] to
cancel and go back to the previous screen.
Example
(this is blank
by default)
(this is blank
by default)
0.0.0.0
Public
0.0.0.0