Snmp Traps; Table 28 Snmp Traps - Nortel BCM50a Configuration Manual

SNMP Traps

The BCM50a Integrated Router will sends traps to the SNMP manager when any
one of the following events occurs:

Table 28 SNMP Traps

Trap #
0
1
4
6
6a
6b
Trap Name
coldStart (defined in
RFC-1215)
warmStart (defined in
RFC-1215)
authenticationFailure (defined
in RFC-1215)
whyReboot (defined in MIB)
For intentional reboot:
For fatal error:
BCM50a Integrated Router Configuration — Advanced
Chapter 12 SNMP Configuration 139
Description
A trap is sent after booting (power on).
A trap is sent after booting (software reboot).
A trap is sent to the manager when receiving
any SNMP get or set requirements with the
wrong community (password).
A trap is sent with the reason of restart
before rebooting when the system is going to
restart (warm start).
A trap is sent with the message "System
reboot by user!" if reboot is done
intentionally, (for example, download new
files, CI command sys reboot, and others).
A trap is sent with the message of the fatal
code if the system reboots because of fatal
errors.