Figure 105 Windows Xp: Internet Protocol (Tcp/Ip) Properties - Nortel BCM50a Configuration Manual

200 Appendix A Setting up your computer IP address
7

Figure 105 Windows XP: Internet Protocol (TCP/IP) properties

8
9
N0115791
— In TCP/IP Gateway Address, type the IP address of the default gateway
in Gateway. To manually configure a default metric (the number of
transmission hops), clear the Automatic metric check box and type a
metric in Metric.
— Click Add.
— Repeat the previous three steps for each default gateway you want to add.
— Click OK when finished.
In the Internet Protocol TCP/IP Properties window (the General tab in
Windows XP):
— Click Obtain DNS server address automatically if you do not know
your DNS server IP addresses.
— If you know your DNS server IP addresses, click Use the following DNS
server addresses, and type them in the Preferred DNS server and
Alternate DNS server fields.
If you have previously configured DNS servers, click Advanced and then
the DNS tab to order them.
Click OK to close the Internet Protocol (TCP/IP) Properties window.
Click OK to close the Local Area Connection Properties window.