Cdr - Nortel BCM50a Configuration Manual

Table 32 System Maintenance Menu Syslog Parameters
Parameter
Syslog Server IP
Address
Log Facility
After you finish configuring this screen, press [ENTER] to confirm or [ESC] to cancel.
Your BCM50a Integrated Router sends five types of syslog messages. Some
examples of these syslog messages with their message formats are shown next:

CDR

CDR Message Format
SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
Channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by 1
for each new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
L02 Tunnel Connected(L2TP)
C02 OutCall Connected xxxx (means connected speed) xxxxx (means Remote
Call Number)
L02 Call Terminated
C02 Call Terminated
Jul 19 11:19:27 192.168.102.2 RAS: board 0 line 0 channel 0, call 1, C01 Outgoing Call dev=2 ch=0
40002
Jul 19 11:19:32 192.168.102.2 RAS: board 0 line 0 channel 0, call 1, C02
OutCall Connected 64000 40002
Jul 19 11:20:06 192.168.102.2 RAS: board 0 line 0 channel 0, call 1, C02 Call Terminated
Chapter 14 System information and diagnosis 153
Description
Enter the IP Address of the server that logs the CDR (Call Detail
Record) and system messages. For example, the syslog server.
Press [SPACE BAR] and then [ENTER] to select a Local option.
Using the log facility, you can log the message to different files in
the server. Refer to the documentation of your syslog program for
more details.
BCM50a Integrated Router Configuration — Advanced