Figure 14 Menu 3.2 - Tcp/Ip And Dhcp Ethernet Setup; Table 8 Dhcp Ethernet Setup Menu Fields - Nortel BCM50a Configuration Manual

Figure 14 Menu 3.2 – TCP/IP and DHCP Ethernet setup
DHCP= Server
Client IP Pool:
Starting Address= 192.168.1.2
Size of Client IP Pool= 126 IP Subnet Mask= 255.255.255.0
First DNS Server= From ISP
IP Address= N/A
Second DNS Server= From ISP
IP Address= N/A
Third DNS Server= From ISP
IP Address= N/A
DHCP Server Address= N/A
Press Space Bar to Toggle.
Follow the instructions in

Table 8 DHCP Ethernet setup menu fields

Field
DHCP
Configuration:
Client IP Pool
Starting Address
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Press ENTER to Confirm or ESC to Cancel:
Description
This field enables and disables the DHCP server.
If set to Server, your BCM50a Integrated Router will
act as a DHCP server.
If set to None, the DHCP server will be disabled.
This field specifies the first of the contiguous
addresses in the IP address pool.
TCP/IP Setup:
IP Address= 192.168.1.1
RIP Direction= None
Version= N/A
Multicast= None
Edit IP Alias= No
Table 8 to configure the DHCP fields.
BCM50a Integrated Router Configuration — Advanced
Chapter 4 LAN setup 59
Example
Server
192.168.1.2