Nortel BCM50a Configuration Manual page 254

254 Appendix G Command Interpreter
Table 59 IP commands
Command
tredir
failcount
partner
target
timeout
checktime
active
save
disp
debug
rpt
active
start
stop
url
ip
N0115791
actionFlags
[act(1-7)]
[enable/disable]
logFlags
[type(1-3)][enabl
e/disable]
add [string]
[trust/untrust/
keyword]
delete [string]
[trust/untrust/
keyword]
reset
<count>
<ipaddr>
<ipaddr>
<timeout>
<period>
<on|off>
<value>
[1:yes|0:no]
Description
Sets the content filtering customize action
flags.
Sets the content filtering customize log flags.
Adds a trusted Web site, forbidden Web site
or keyword blocking string.
Deletes a trusted Web site, forbidden Web
site or keyword blocking string.
Returns to the default configuration.
Sets the number of times that the device can
ping the target without a response before
forwarding traffic to the backup gateway.
Sets the traffic redirect backup gateway IP
address.
Sets the IP address that the device uses to
test WAN accessibility.
Sets the number of seconds the device waits
for a response from the target.
Sets the number of seconds the device waits
between attempts to connect to the target.
Enables or disables traffic redirect.
Saves traffic redirect configuration.
Displays the traffic redirect configuration.
Sets the traffic redirect debug value.
Enables or disables the reports.
Starts recording reports data.
Stops recording reports data.
Records the most visited Web sites.
Records the LAN IP addresses that sent and
received the most traffic.