Nortel BCM50a Configuration Manual page 255

Table 59 IP commands
Command
srv
stroute
display
load
save
config
dropIcmp
igmp
debug
forwardall
querier
iface
[rule # | buf]
<rule #>
name <site name>
destination <dest
addr>[/<bits>]
<gateway>
[<metric>]
mask <IP subnet
mask>
gateway <IP
address>
metric <metric #>
private <yes|no>
active <yes|no>
[0|1]
[level]
[on|off]
[on|off]
<iface> grouptm
<timeout>
<iface> interval
<interval>
<iface> join
<group>
BCM50a Integrated Router Configuration — Advanced
Appendix G Command Interpreter 255
Description
Records the most heavily used protocols or
service ports.
Displays the list of static routes or detailed
information on a specified rule.
Loads the specified static route rule into the
buffer.
Saves a rule from the buffer to the System
Parameters Table.
Sets the name for a static route.
Sets a static route's destination IP address
and gateway.
Sets a static route's subnet mask.
Sets a static route's gateway IP address.
Sets a static route's metric number.
Turns private mode on or off.
Enables or disables a static route rule.
Sets whether or not the device allows ICMP
fragment packets.
Sets IGMP debug level.
Activates or deactivates IGMP forwarding to
all interfaces flag.
Turns on or off IGMP stop query flag.
Sets IGMP group timeout for the specified
interface.
Sets IGMP query interval for the specified
interface.
Adds an interface to a group.