Nortel BCM50a Configuration Manual page 273

Table 64 Certificates commands
Command
create
create
create
Description
Creates a self-signed local host certificate.
selfsigned
<name> specifies a descriptive name for the
<name>
generated certificate.
<subject>
<subject> specifies a subject name (required) and
[key size]
alternative name (required). The format is
"subject-name-dn;{ip,dns,email}=value". If the name
contains spaces, put it in quotes.
[key size] specifies the key size. It has to be an
integer from 512 to 2 048. The default is 1 024 bits.
Creates a certificate request and saves it to the
request
router for later manual enrollment.
<name>
<name> specifies a descriptive name for the
<subject>
generated certification request.
[key size]
<subject> specifies a subject name (required) and
alternative name (required). The format is
"subject-name-dn;{ip,dns,email}=value". If the name
contains spaces, put it in quotes.
[key size] specifies the key size. It has to be an
integer from 512 to 2 048. The default is 1 024 bits.
Creates a certificate request and enrolls for a
scep_enroll
certificate immediately online using SCEP protocol.
<name> <CA
<name> specifies a descriptive name for the enrolled
addr> <CA
certificate.
cert> <auth
<CA addr> specifies the CA server address.
key>
<CA cert> specifies the name of the CA certificate.
<subject>
<auth key> specifies the key used for user
[key size]
authentication. If the key contains spaces, put it in
quotes. To leave it blank, type "".
<subject> specifies a subject name (required) and
alternative name (required). The format is
"subject-name-dn;{ip,dns,email}=value". If the name
contains spaces, put it in quotes.
[key size] specifies the key size. It has to be an
integer from 512 to 2 048. The default is 1 024 bits.
BCM50a Integrated Router Configuration — Advanced
Appendix G Command Interpreter 273