Ftp File Upload Command From The Dos Prompt Example - Nortel BCM50a Configuration Manual

To upload the firmware and the configuration files, follow the examples in the rest
of this chapter:

FTP file upload command from the DOS prompt example

1 Launch the FTP client on your computer.
2 Enter "open", followed by a space and the IP address of your BCM50a
Integrated Router.
3 Press [ENTER] when prompted for a username.
4 Enter your password as requested (the default is "PlsChgMe!").
5 Enter "bin" to set transfer mode to binary.
6 Use "put" to transfer files from the computer to the BCM50a Integrated
Router, for example, "put firmware.bin ras" transfers the firmware on your
computer (firmware.bin) to the BCM50a Integrated Router and renames it
"ras". Similarly, "put config.rom rom-0" transfers the configuration file on
your computer (config.rom) to the BCM50a Integrated Router and renames it
rom-0. Likewise get rom-0 config.rom transfers the configuration file on the
BCM50a Integrated Router to your computer and renames it "config.rom."
See "Filename conventions" on page 161
filename conventions.
7 Enter "quit" to exit the ftp prompt.
Note: The BCM50a Integrated Router automatically restarts after a
successful file upload.
Chapter 15 Firmware and configuration file maintenance 171
BCM50a Integrated Router Configuration — Advanced
for more information about