164 Chapter 15 Firmware and configuration file maintenance
Example of FTP commands from the command line
Figure 81 FTP Session Example
GUI-based FTP clients
Table 35
clients.
Table 35 General commands for GUI-based FTP clients
Command
Host Address
Logon Type
Transfer Type
Initial Remote Directory
Initial Local Directory
TFTP and FTP over WAN Management Limitations
TFTP, FTP and Telnet over WAN do not work when:
N0115791
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 config.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit
describes some of the commands that you can see in GUI-based FTP
Description
Enter the address of the host server.
Anonymous.
This is when a user ID and password is automatically supplied
to the server for anonymous access. Anonymous logons will
work only if your ISP or service administrator has enabled this
option.
Normal.
The server requires a unique User ID and Password to log on.
Transfer files in either ASCII (plain text format) or in binary
mode.
Specify the default remote directory (path).
Specify the default local directory (path).