Table of Contents
Advertisement
148 Chapter 14 System information and diagnosis
Table 30 Menu 24.1 System Maintenance: Status (continued)
Field
Up Time
My WAN IP
(from ISP)
Ethernet
Status
Tx Pkts
Rx Pkts
Collision
WAN
Line Status
Upstream
Speed
Downstream
Speed
CPU Load
System information and console port speed
With your system you can choose different console port speeds. To get to the
System Information and Console Port Speed.
1
2
3
N0115791
Description
This is the time this channel has been connected to the current remote
node.
This is the IP address of the ISP remote node.
This shows statistics for the LAN.
This shows the current status of the LAN.
This is the number of transmitted packets to the LAN.
This is the number of received packets from the LAN.
This is the number of collisions.
This shows statistics for the WAN.
This shows the current status of the xDSL line which can be Up or Down.
This shows the upstream transfer rate in kbps.
This shows the downstream transfer rate in kbps.
This specifies the percentage of CPU utilization.
Note: The console port is not available.
Enter 24 to go to Menu 24 – System Maintenance.
Enter 2 to open Menu 24.2 - System Information and Console Port Speed.
From this menu you have two choices, as shown in
Figure
72:
Advertisement
Chapters
Table of Contents
