Avaya one-X 9600 Series Administrator's Manual page 96

Administering Telephone Options
Table 12: 9600 Series IP Telephone Customizable System Parameters (continued)
Parameter Name
STATIC
SUBSCRIBELIST
TALKFEATURES
TLSDIR
TLSPORT
TLSSRVRID
TPSLIST
96 9600 Series IP Deskphone Administrator Guide Release 6.0
Default Value Description and Value Range
0 Static programming override flag. If set to "0" static
programming never overrides call server (DHCP) or
call server administered data. If set to "1" static
programming overrides only file server administered
data. If set to "2" static programming overrides only call
server administered data. If set to "3" static
programming overrides both file server- and call
server-administered data. Allows a call server IP
Address that has been manually programmed into a
telephone to override any value received via DHCP or
via this configuration file. A manually programmed IP
Address will only be used if it is not 0.0.0.0, so this
parameter may be used to allow only specific
telephones to use a different value than otherwise
provided by this configuration file. If STATIC is to be
used to select a manual override of file server IP
Address(es), STATIC must be set via DHCP, not via
this configuration file.
" " (Null) One or more Push application server subscription
URLs, separated by commas without any intervening
spaces (0-255 ASCII characters, including commas).
" " (Null) A list of feature number identifiers for softkey features
potentially available for the entire active call state. Zero
to 255 ASCII characters consisting of zero to three
whole numbers separated by commas without any
intervening spaces. For more information, see
Administering Features on Softkeys
" " (Null) Path name prepended to all file names used in HTTP
GET operations during startup. Zero to 127 ASCII
characters.
411 TCP port number used for HTTP file downloading. 2 to
5 ASCII numeric digits. Valid values are "80" through
"65535".
1 Controls whether the identity of a TLS server is
checked against its certificate. 1 ASCII numeric digit.
Valid values are:
1=Provides additional security by checking to verify
that the server certificate's DNS name matches the
DNS name used to contact the server.
0=Certificate is not checked against the DNS name
used to contact the server.
" " (Null) One or more trusted domain/path strings, separated by
commas without any intervening spaces (0-255 ASCII
characters, including commas). A URL pushed to a
telephone must contain one of these strings if it is to be
used to obtain content to be rendered by the
telephone.
on page 118.
15 of 18