Avaya one-X 9600 Series Administrator's Manual page 86

Administering Telephone Options
Table 12: 9600 Series IP Telephone Customizable System Parameters (continued)
Parameter Name
DNSSRVR
DOMAIN
DOT1X
DOT1XSTAT
DROPCLEAR
ENHDIALSTAT
FBONCASCREEN
GRATARP
86 9600 Series IP Deskphone Administrator Guide Release 6.0
Default Value Description and Value Range
0.0.0.0 Text string containing the IP Address of zero or more
DNS servers, in dotted-decimal format, separated by
commas with no intervening spaces (0-255 ASCII
characters, including commas).
" " (Null) Text string containing the domain name to be used
when DNS names in parameter values are resolved
into IP Addresses. Valid values are 0-255 ASCII
characters. If Null, no spaces allowed.
0 802.1X Supplicant operation mode. Valid values are:
0=With PAE pass-through, 1=with PAE pass-through
and proxy Logoff, 2=without PAE pass-through or
proxy Logoff. For more information, see
802.1X
0
Determines how the telephone handles Supplicants.
Valid values are:
0=Supplicant operation is completely disabled.
1=Supplicant operation is enabled, but responds only
to received unicast EAPOL messages.
2= Supplicant operation is enabled and responds to
received unicast and multicast EAPOL messages.
For more information, see
1 VPN only. Specifies the treatment of clear IPsec
packets. One ASCII numeric digit. Valid values are: 0=
all other packets will be processed, but not by IPsec, or
1=all other packets will be discarded.
1 Enhanced Dialing Status. If set to "1" the
Methods
applications. If set to "0" the feature is turned off.
0 For the 9630/9630G/9640/9640G IP Deskphones,
indicates whether to display feature buttons on
available lines on the Call Appearance (Phone) screen.
Values are: 1=Yes; 0=No.
0 Gratuitous ARP flag. Controls whether the telephone
will process gratuitous ARPS or ignore them.
If you use Processor Ethernet (PE) duplication and if
your phones are on the same subnet as the PE
interfaces, set this parameter to "1" to allow the fastest
failover to the new PE interface.
Valid values are:
1 = Yes, process gratuitous ARPS
0 = No, ignore gratuitous ARPS
on page 105.
IEEE 802.1X
feature is turned on for all associated
IEEE
on page 105.
Dialing
5 of 18