Avaya one-X 9600 Series Administrator's Manual page 94

Administering Telephone Options
Table 12: 9600 Series IP Telephone Customizable System Parameters (continued)
Parameter Name
PUSHCAP
PUSHPORT
QKLOGINSTAT
QTESTRESPONDER
REREGISTER
REUSETIME
RFSNAME
RINGBKFEATURES
RINGTONESTYLE
RTCPMON
94 9600 Series IP Deskphone Administrator Guide Release 6.0
Default Value Description and Value Range
2222 Push capabilities. Valid values are any three or four
digit combination using only the digits "0", "1", or "2".
For information on push messaging and administration,
see the Avaya one-X™ Deskphone Edition for 9600
Series IP Telephones Application Programmer
Interface (API) Guide (Document Number 16-600888).
80 TCP listening port number used for the telephone's
HTTP server. 2 to 5 ASCII numeric digits, "80" through
"65535".
1 Quick login permission flag. Valid values are:
1= Quick login permitted; user must press the # key to
see the previous Extension and Password.
0= Quick login not permitted; the user must explicitly
enter the Extension and Password.
" " (Null) Specifies the IP Address to which Qtest messages
should be sent. The device at this address must
support the echo service on UDP port 7, as specified in
IETF RFC 862. Format is dotted decimal, colon-hex, or
DNS format, separated by commas, with no spaces.
Zero to 255 ASCII characters, including commas.
20 Registration timer in minutes. Controls an H.323
protocol timer that should only be changed under very
special circumstances by someone who fully
understands the system operation impact. Value is
1-120.
60 The number of seconds to wait for successful
completion of DHCP before reusing previous
parameters on the default (port) VLAN. Valid values
are 1 to 3 ASCII numeric digits, "0" and "20" through
"999".
" " (Null) Applies only to deskphones running software Release
6.0 and later. The file name of the Signed Kernel/Root
Software Package that should be downloaded and
installed by the telephone during power-up or reset if it
has not already been downloaded and installed. This
parameter should only be set in an upgrade file.
" " (Null) A list of feature number identifiers for softkey features
potentially available in the active (with far end
ringback) call state. Zero to 255 ASCII characters
consisting of zero to three whole numbers separated
by commas without any intervening spaces. For more
information, see
Softkeys
0 The Ring Tone Style Menu initially offered to the user
(0=Classic; 1=Alternate, more modern ringtones).
" " (Null) Text string containing the 4-octet IP Address of the
RTCP monitor currently in use, in dotted decimal or
DNS Name format (0-15 ASCII characters, no spaces).
Administering Features on
on page 118.
13 of 18