Avaya one-X 9600 Series Administrator's Manual page 102

Administering Telephone Options
Note:
The 9610 IP Telephone does not support full VLAN separation because it has no
Note:
secondary Ethernet interface and therefore never has PHY2VLAN and
PHY2PRIO values.
Table 13: VLAN Separation Rules
If
VLANSEP is "1"
(On/Enabled)
102 9600 Series IP Deskphone Administrator Guide Release 6.0
AND the deskphone is
tagging frames with a
VLAN ID not equal to
PHY2VLAN,
AND the PHY2VLAN
value is not zero.
Then
Tagged Frames received on the secondary
Ethernet interface:
Tagged frames received on the secondary Ethernet
interface are changed/not changed as follows:
If a Gigabit Ethernet Adapter is not being used,
tagged frames with a VLAN ID of zero (priority-tagged
frames) will be changed before they are forwarded
such that the VLAN ID of the forwarded frame is equal
to the PHY2VLAN value and the priority value is
equal to the PHY2PRIO value.
If a Gigabit Ethernet Adapter is being used, tagged
frames with a VLAN ID of zero will not be changed
before they are forwarded.
Untagged frames received on the secondary Ethernet
interface are not changed before forwarding to the
network.
Tagged Frames received on the line interface:
Tagged frames received on the Ethernet line interface
will only be forwarded to the secondary Ethernet
interface if the VLAN ID equals PHY2VLAN.
Tagged frames received on the Ethernet line interface
will only be forwarded to the deskphone if the VLAN
ID equals the VLAN ID used by the deskphone.
Untagged frames are not changed will continue to be
forwarded or not forwarded as determined by the
Ethernet switch forwarding logic.
Tagged frames with a VLAN ID of zero
(priority-tagged frames) will be forwarded to the
secondary Ethernet interface or to the deskphone as
determined by the forwarding logic of the Ethernet
switch, but the tag will still be removed from frames
that egress from the secondary Ethernet interface.
1 of 3