Avaya one-X 9600 Series Administrator's Manual page 45

Access Code (PROCPSWD). Administer these three parameters using Page 3 of the change
system-parameters ip-options form.
Communication Manager Feature Administration
Feature
On-Hook Dialing
Auto Hold
Coverage Path
Enhanced Conference
Features
EC500
Administration
Set up CM so that the phone supports on-hook dialing. Use the
System Parameters Features form page 10. Use the command
Change system-parameters features to view the form
and make the change.
Set up CM to enable Auto Hold, so that the phone automatically
places an active call on hold when the user answers or resumes
a call on another call appearance. Use the System Parameters
Features form, page 6
Administer a coverage path for both phone demonstration and
normal operations. Use the Coverage Path form and give it a
number, for example, Coverage path 1. If Voice Mail is available,
this is also where you administer the hunt group or VDN,
depending on the type of VM system being used.
Enable enhanced conference display to support the user
experience for conferences. Block Enhanced Conference Display
on the Class of Restriction (COR) form must be set to No. Use
the command Change COR, followed by a number, to view the
form and make the change. a sample of the Class of Restriction
form.
If EC500 licenses have been acquired, enable EC500 on the
Off-PBX Telephones Station Mapping form. This feature requires
trunking to work properly. Use the following command to make
the change:
Change Off-pbx Telephone Mapping
Telephone Administration
.
Issue 8 August 2010
1 of 2
45