Avaya one-X 9600 Series Administrator's Manual page 30

Network Requirements
Note:
In many cases, the ports used are the ones called for by IETF or other standards
Note:
bodies.
Some of the explanations in
parameters or options settings. For more information about parameters and
settings, see
Table 5: Received Packets (Destination = 9600 Series IP Telephone)
Destination Port
The number used in the
Source Port field of Qtest
packets sent by the phone
The number used in the
Source Port field of DNS
packets sent by the telephone
The number used in the
Source Port field of the
packets sent by the
telephone's HTTP client
Release 2.0+ = PUSHPORT
Pre-Release 2.0 = 80
500, 2070, or 4500
The number used in the
Source Port field of the TLS/
SSL packets sent by the
telephone's HTTP client
500, 2070, or 4500
50000
The number used in the
Source Port field of
registration messages sent by
the telephone's CNA test plug
1720
30 9600 Series IP Deskphone Administrator Guide Release 6.0
Administering Options for the 9600 Series SIP IP
Source Port
500 or 4500
68
161
500
500 or 4500
Table 5 and Table 6 refer to configuration
7 Received Qtest messages
Any Received DNS messages
Any Packets received by the
telephone's HTTP client
Any Packets received by the
telephone's HTTP server
Received IKE or IPsec
messages (if
NVIKEOVERTCP is 1 or 2)
Any TLS/SSL packets received
by the telephone's HTTP
client
Any Received DHCP messages
Any Received SNMP messages
Any Received DHCPv6
messages
Received IKE or IPsec
messages (if
NVIKEOVERTCP is 0 or 1)
Any Received CNA test request
messages
Any Received CNA registration
messages
Any H.323 signaling messages
Telephones.
Use UDP or TCP?
UDP
UDP
TCP
TCP
TCP
TCP
UDP
UDP
UDP
UDP
UDP
TCP
TCP
1 of 2