Avaya one-X 9600 Series Administrator's Manual page 83

Table 12: 9600 Series IP Telephone Customizable System Parameters (continued)
Parameter Name
APPSTAT
AUDASYS
AUDIOENV
AUDIOSTHD
AUDIOSTHS
AUTH
Administering Options for the 9600 Series IP Telephones
Default Value Description and Value Range
1 Controls whether specific applications are enabled,
restricted, or disabled. Values are: 1=all applications
enabled, 2=Speed Dial (Contacts) changes and Call
Log disabled and Redial last number only, 3=Speed
Dial (Contacts) changes disabled, 0=Speed Dial
(Contacts) changes, Call Log, and Redial disabled.
3 Globally controls audible alerting. Possible system
settings for audible alerting are "0" through "3" as
follows:
0=Audible Alerting is Off; user cannot change this
setting.
1=Audible Alerting is On; user cannot change this
setting.
2=Audible Alerting is Off; user can change this setting.
3=Audible Alerting is On; user can change this setting.
0 Audio environment selection index. Valid values are 0
through 299. Note that pre-Release 2.0 software has
different valid ranges.
0 Headset sidetone setting. Valid values for applicable
sidetone masking ratings (STMR) are:
0=16db STMR; no change to sidetone level
1=24dB STMR; three steps softer than nominal
2=36dB STMR (off); no sidetone (infinite loss, i.e.,
inaudible).
3=19dB STMR; one level softer than nominal
4=21dB STMR; two steps softer than nominal
5=27dB STMR; four steps softer than nominal
6=30dB STMR; five steps softer than nominal
7=33dB STMR; six steps softer than nominal
8=13dB STMR; one step louder than nominal
9=10dB STMR; two steps louder than nominal
Pre-Release 2.0 software has different valid ranges.
0 Handset sidetone setting. Valid values are:
0=16db STMR; no change to sidetone level
1=24dB STMR; three steps softer than nominal
2=36dB STMR (off); no sidetone (infinite loss, i.e.,
inaudible).
3=19dB STMR; one level softer than nominal
4=21dB STMR; two steps softer than nominal
5=27dB STMR; four steps softer than nominal
6=30dB STMR; five steps softer than nominal
7=33dB STMR; six steps softer than nominal
8=13dB STMR; one step louder than nominal
9=10dB STMR; two steps louder than nominal
Pre-Release 2.0 software has different valid ranges.
0 Script file authentication value (0=HTTP is acceptable,
1=HTTPS is required).
2 of 18
Issue 8 August 2010 83