Avaya one-X 9600 Series Administrator's Manual page 110

Administering Telephone Options
On receipt of a LLDPDU message, the deskphones will act on the TLV elements described in
Table 15:
Table 15: Impact of TLVs Received by 9600 Series IP Deskphones on System Parameter
Values
System
Parameter Name
PHY2VLAN
L2QVLAN and
L2Q
110 9600 Series IP Deskphone Administrator Guide Release 6.0
TLV
Name
IEEE 802.1 Port
VLAN ID
IEEE 802.1 VLAN
Name
Impact
The value is changed to the Port VLAN identifier in
the TLV.
The value is changed to the TLV VLAN Identifier.
L2Q will be set to 1 (ON).
VLAN Name TLV is only effective if:
The telephone is not registered with the Call
●
Server.
Name begins with VOICE (case does not
●
matter).
The VLAN is not zero.
●
DHCP Client is activated.
●
The telephone is registered but is not tagging
●
layer 2 frames with a non-zero VLAN ID.
If VLAN Name causes the telephone to change
VLAN and the telephone already has an IP Address
the telephone will release the IP Address and reset.
If the TLV VLAN ID matches the VLAN ID the
telephone is using, the VLAN ID is marked as set by
LLDP. Otherwise, if already registered, the
telephone waits until there are no active calls,
releases its IP Address, turns on tagging with the
TLV VLAN ID, sets L2Q to "on," changes the default
L2Q to "on," and resets. If there is no valid IP
Address, the telephone immediately starts tagging
with the new VLAN ID without resetting.