Avaya one-X 9600 Series Administrator's Manual page 87

Table 12: 9600 Series IP Telephone Customizable System Parameters (continued)
Parameter Name
GRATNAV6
GUESTDURATION
GUESTLOGINSTAT
GUESTWARNING
HEADSYS
HOMEIDLETIME
HTTPDIR
Administering Options for the 9600 Series IP Telephones
Default Value Description and Value Range
0 Applies only to deskphones running software Release
6.0 and later. Specifies whether gratuitous (unsolicited)
IPv6 Neighbor Advertisement messages will be
processed. A received message is considered
unsolicited if the telephone did not send a
corresponding Neighbor Solicitation message first; it is
not determined by the value of the Solicited flag in the
received message. An IPv6 unsolicited Neighbor
Advertisement message is similar to a gratuitous ARP
message in IPv4.
Valid values are:
0=Do not process received unsolicited Neighbor
Advertisement messages.
1=Process received unsolicited Neighbor
Advertisement messages if an entry already exists for
the target address in the Neighbor Cache.
2 Guest login duration in hours. One or two ASCII
numeric digits. Valid values are "1" through "12".
0 Guest login permission flag. If "1" the Guest Login
option is listed on the Avaya Menu; if "0" the Guest
Login option is not available.
5 Guest login warning in minutes to indicate when to
notify the user that GUESTLOGINDURATION will
expire. One or two ASCII numeric digits. Valid values
are "1" through "15".
1 Headset operational mode. One ASCII numeric digit.
Valid values are:
0 or 2 =General Operation, where a disconnect
message returns the telephone to an idle state.
1 or 3 = Call Center Operation, where a disconnect
message does not change the state of the telephone.
10 For touchscreen deskphones only, the number of
minutes after which the Home screen will be
displayed.Value is 1 or 2 ASCII numeric digits, "0"
through "30". If you prefer an idle Web page to display
instead of the Home screen, set this value to less than
the WMLIDLETIME value.
" " (Null) HTTP server directory path. The path name prepended
to all file names used in HTTP and HTTPS get
operations during initialization. Value: 0-127 ASCII
characters, no spaces. Null is a valid value. Leading or
trailing slashes are not required. The command syntax
is "SET HTTPDIR myhttpdir" where "myhttpdir" is your
HTTP server path. HTTPDIR is the path for all HTTP
operations except for BRURI.
6 of 18
Issue 8 August 2010 87