Avaya one-X 9600 Series Administrator's Manual page 38

Deskphone release 6.0
Hide thumbs Also See for one-X 9600 Series:
Table of Contents

Advertisement

Communication Manager Administration
Note:
Although the 9620/9620L/9620C can be aliased as a 4620SW IP Telephone,
Note:
some features are not available. For example, the 9620 phones only support a
total of 12 call appearances and administered feature buttons. The 4620 can be
administered for a total of 24 call appearances and feature buttons.
Note:
Call appearances are not configurable for native support of the 9610 in CM 4.0.
Note:
Care should be taken when aliasing the 9610 as a 4610, since the call
appearances are configurable but must adhere to the unique 9610 administrative
guidelines found in
Administration for the 9610 IP
Note:
Softphone is currently not supported using native support of the 96xx phones.
Note:
For specific administration instructions about aliasing 9600 Series IP Telephones, see
Administering Stations
When a 9610 IP Telephone is aliased as a 4610SW IP Telephone, its four administrable call
appearances/features should be:
one primary call appearance
the Directory, Next, and Make Call feature buttons (hard-coded with CM 4.0 or later)
The 9610 ignores any other features or call appearances.
When a 9620/9620L/9620C IP Telephone is aliased as a 4620SW IP Telephone, do not
administer:
a button module (SBM24, EU24, or EU24BL), or
feature buttons 13 through 24.
The 9608, 9611G, 9621G, 9630/9630G, 9640/9640G, 9641G, 9650/9650C, and 9670G IP
Deskphones support twenty-four administrable telephony call appearances or features. In
addition, the 9630/9630G, 9640/9640G, 9650/9650C, and 9670G IP Deskphones support the
SBM24 Button Module. These models always support a single SBM24, and within CM 4.0 or
later, support up to three SBM24 Button Modules per telephone. As of software Release 6.0,
the 9608, 9611G, and 9641G can support up to three BM12 Button Modules or up to three
SBM24 Button Modules; multiple button modules attached to a single 9608, 9611G or 9641G
must all be the same model type.
The SBM24 Button Module and the BM12 Button Module provide another twenty-four
administrable call appearances and features; the BM12 displays twelve call appearances/
features at a time on each of two pages. Either button module can be used freestanding or
attached directly to the applicable deskphone.
38 9600 Series IP Deskphone Administrator Guide Release 6.0
For the 9610 IP Telephone
Telephone.
on page 47.
on page 49 and
Special

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

One-x 9611gOne-x 9621gOne-x 9641gOne-x 9608

Table of Contents