Avaya one-X 9600 Series Administrator's Manual page 90

Administering Telephone Options
Table 12: 9600 Series IP Telephone Customizable System Parameters (continued)
Parameter Name
LOGUNSEEN
MCIPADD
MSGNUM
MYCERTCAID
MYCERTCN
MYCERTDN
MYCERTKEYLEN
MYCERTRENEW
MYCERTURL
MYCERTWAIT
90 9600 Series IP Deskphone Administrator Guide Release 6.0
Default Value Description and Value Range
0 Indicates that a Call Log entry should be maintained for
calls that are redirected from the telephone, for
example, Call forwarded calls. Values are: 1=Yes;
0=No.
Note: CM 5.2 or later is required for this feature to
work.
0.0.0.0 Call Server Address. Zero or more Avaya
Communication Manager server IP Addresses. Format
is dotted-decimal or DNS name format, separated by
commas without intervening spaces (0-255 ASCII
characters, including commas). Null is a valid value.
" " (Null) Voice mail system telephone/extension number.
Specifies the number to be dialed automatically when
the telephone user presses the Message button.
MSGNUM is only used when the phone is aliased
using non-native support. Messaging must be
configured for native support. Value: 0-30 ASCII
dialable characters (0-9, * and #) and no spaces. Null
is a valid value.
"CAIdentifier" Certificate Authority Identifier to be used in a certificate
request. 0 to 255 ASCII characters.
"$SERIALNO" Common Name of the Subject of a certificate request.
0 to 255 ASCII characters that contain the string
"$SERIALNO" or "$MACADDR".
" " (Null) Additional information for the Subject of a certificate
request. 0 to 255 ASCII characters
1024 Bit length of the private key to be generated for a
certificate request. 4 ASCII numeric digits, "1024"
through "2048".
90 Percentage of a certificate's Validity interval after which
renewal procedures will be initiated. 1 or 2 ASCII
numeric digits, "1" through "99".
" " (Null) URL to be used to contact an SCEP server. 0 to 255
ASCII characters, zero or one URL.
1 Specifies whether the telephone will wait until a
pending certificate request is complete, or whether it
will periodically check in the background. 1 ASCII
numeric digit, "0" or "1" as follows:
1 = If a connection to the SCEP server is successfully
established, SCEP will remain in progress until the
request for a certificate is granted or rejected.
0 = SCEP will remain in progress until the request for a
certificate is granted or rejected or until a response is
received indicating that the request is pending for
manual approval.
9 of 18