Omron SYSDRIVE 3G3MV Setup Manual page 73

List of Parameters
Param- Reg- Name
eter ister
No. No.
(Hex)
Note Frequency reference loss (setting value: 20) and inverter overheating warning (setting value: 26)
can be set for 5.5-kW and 7.5-kW Inverters only.
Description
13 Inverter ON: Inverter ready
ready to operate (with no
fault detected)
14 Fault retry ON: Fault retry
15 UV in ON: Undervoltage
progress being monitored
16 Rotating in ON: Rotating in
reverse reverse direction
direction
17 Speed ON: Speed search
search in in progress
progress
18 Commu- ON: Turns commu-
nications nications output 1
output ON.
19 PID feed- ON: PID feedback
back loss loss enabled.
20 Frequency ON: Frequency ref-
(See reference erence lost (when
note loss frequency refer-
2.) ence loss detection
in n064 is enabled,
and either analog
input or pulse train
input is set for fre-
quency reference
selection in n004)
21 Inverter ON: Inverter over-
(See overheat- heating warning
note ing warn- (ON when the mul-
2.) ing oH3 ti-function input In-
verter overheating
warning signal is
being input, i.e.,
when 0H3 is flash-
ing.)
Chapter 3
Set- Default Chan-
ting setting ges
range during
opera-
tion
Memo
3-19