Omron SYSDRIVE 3G3MV Setup Manual page 69

List of Parameters
Param- Reg- Name
eter ister
No. No.
(Hex)
Note
Selection 2
OFF
OFF
ON
ON
Description
27 Accelera-
tion/decel-
eration
time
selection 2
Selection 1
OFF
ON
OFF
ON
A pair of inputs is
needed to select ac-
celeration and decel-
eration times. If ac-
celeration/decelera-
tion time selection 2
(setting: 27) is not
set at any multi-func-
tion input from n050
to n056, the Inverter
will determine that
the acceleration/de-
celeration selection 2
is set to OFF, and
select the accelera-
tion/deceleration
time.
In the same way, if
acceleration/decel-
eration time selec-
tion 1 (setting: 11) is
not set at any multi-
function input, the In-
verter will determine
that the acceleration/
deceleration selec-
tion 1 is set to OFF,
and select the accel-
eration/deceleration
time.
See note.
Acceleration/deceleration time
Acceleration time 1 (n019)
Deceleration time 1 (n020)
Acceleration time 2 (n021)
Deceleration time 2 (n022)
Acceleration time 3 (n041)
Deceleration time 3 (n042)
Acceleration time 4 (n043)
Deceleration time 4 (n044)
Chapter 3
Set- Default Chan-
ting setting ges
range during
opera-
tion
Memo
3-15