Omron SYSDRIVE 3G3MV Setup Manual page 70

List of Parameters
Param- Reg- Name
eter ister
No. No.
(Hex)
Note Available for 5.5- and 7.5-kW Inverters only.
3-16
Description
The Inverter will not
28 General -
operate with S1 to
purpose
input 1 S7 sensor input if
these functions are these functions are
29 General -
set. They are used
purpose
when you want sen-
input 2
sors to provide SYS-
MAC information via MAC information via
30 General -
the Inverter for
purpose
RS422/485 or Option
input 3
Unit communications
(DeviceNet) (DeviceNet).
31 General -
The status of S1 to
purpose
S7 is constantly re-
input 4
freshed at register freshed at register
002B regardless of
32 General -
the n050 to n056
purpose
settings.
input 5
Multi-function input Multi-function input
33 General -
monitoring is a use-
purpose
ful function for Devi-
input 6
ceNet.
34 Up or Up or down com-
down mand (set in n056
command only)
By setting n056 to
34, the set value in
n055 is ignored and
the following setting
are forcibly made.
S6: Up command
S7: Down command
35 Self-diag- ON: RS-422/485
nostic test communications self-
diagnostic test (set in
n056 only)
Chapter 3
Set- Default Chan-
ting setting ges
range during
opera-
tion
Memo