AT&T SB67030 System Administrator Manual page 67

AT&T SB67010 Gateway, SB67030 Deskset System Administrator's Guide
To create a Ring Group:
Figure 66. Create Ring Group Menu
System Configuration
1. Enter an appropriate name for the new ring group.
2. Select the Target: for the ring group under Ring Group No
Answer:.
Select Off to let the ring group ring until the call is answered
or the caller hangs up.
Select Voicemail and enter a Target Extension: in the text
box to assign an extension's Voicemail to answer calls after the
number of seconds you choose for Seconds before
Forwarding:.
If you select the Voicemail option, the target extension does
not ring after the Seconds before Forwarding:. The call
goes directly to Voicemail.
Select Extension to forward the call to the Target
Extension: entered in the text box after the number of
seconds you choose for Seconds before Forwarding.
3. Select the extensions that should be in the ring group from the
Available Extensions drop-down menu and click
"Ring Groups" on page 66
no one answers the call at any of the ring group extensions, the
call is forwarded according to that extension's Call Forward No
Answer settings. If there is no Call Forward No Answer target set,
the ring group rings forever.
4. Click to save these settings when you are done.
The new ring group appears on the Ring Groups Summary page.
67
for more information on ring groups.) If
. (See