AT&T SB67030 System Administrator Manual page 95

AT&T SB67010 Gateway, SB67030 Deskset System Administrator's Guide
To restore the System Settings:
Figure 98. Backup/Restore System Settings
CAUTION: If you are performing a system restore, ensure that there are no calls in progress or they will be
dropped.
System Configuration
1. Log into the WEBUI using the IP address of the
Gateways (not a Deskset) to be restored.
2. If it is practical, unplug the PSTN lines from this
Gateway while restoration is in progress to ensure
you will not receive any incoming calls. If you have
more than one Gateway, you do not need to unplug
all of the other PSTN lines from the other Gateways,
just the one that you are logged onto.
3. To restore the system settings, under Restore
System Settings, choose the system settings you
wish to restore, as shown in Figure 98.
4. Click
earlier to a specified location on your computer.
5. Click
restored and the Gateway reboots. You are then
logged out of the WEBUI.
95
and select the file which you saved
. System settings are