Connection Wizard - Universal Repeater Mode; Ap Select - ZyXEL Communications WAP3205 User Manual

Table 5 Connection Wizard - Access Point Mode> Device Information
L A BEL
- IP Address
- IP Subnet Mask
- DHCP Server
WLAN Information
-MAC Address
- Status
- Name (SSID)
- Channel
- Operating Channel
- Security Mode
- 802.11 Mode
- WPS
Run Wizard setup again
Go to advanced settings
3.5 C o nne c tio n Wiza rd - Unive rsa l Re pe a te r Mo de
In Universal Repeater mode, your WAP3205 v3 can act as an access point and wireless client at the
same time.
3.5.1 AP Se le c t
The following screen will open. Use this screen to connect the WAP3205 v3 to a wireless network.
Chapter 3 Connection Wizard
DESC RIPT IO N
This shows the LAN port's IP Address.
This shows the LAN port's IP Subnet Mask.
This shows the LAN port's DHCP server status.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN -
This shows a descriptive name used to identify the WAP3205 v3 in the
wireless LAN.
This shows the channel number which you select manually or
the WAP3205 v3 automatically scans and selects the Wireless Lan's
channel.
This shows the current channel number the WAP3205 v3 uses over the
wireless LAN.
This shows the data encryption method the WAP3205 v3 uses for the
wireless connection.
This shows the IEEE 802.11 standard that the WAP3205 v3 supports.
Wireless clients must support the same standard in order to be able to
connect to the WAP3205 v3.
This displays
C o nfig ure d
set up.
This displays
Unc o nfig ure d
Click here to run the Wizard setup one more time.
Click here to go to your WAP3205 v3's advanced settings.
WAP3205 v3 User's Guide
24
when the WPS (Wi-Fi Protected Setup) has been
if the WPS has not been set up.
or .
Ena b le d Disa b le d
when
Auto