Phone Port; Console Port - ZyXEL Communications WAC6000 Series Manual

Trim any excess wires. Place the dust caps over the terminated wires.
5

1.5.2 Phone Port

Connect a digital telephone to the RJ-45 PHONE port at the bottom of the NWA to forward voice
traffic to/from the telephone switchboard that is connected to the RJ-45 PHONE port on the back of
the NWA. The NWA does not support VoIP (Voice over Internet Protocol) and the PHONE port is
NOT for making calls over the regular networking network (PSTN), either.

1.5.3 Console Port

To use the CLI commands to configure the NWA, connect an RJ-45-to-DB-9 cable to the PHONE
port at the bottom of the NWA.
Chapter 1 Introduction
NWA5000 / WAC6000 Series User's Guide
19