To Specify A Software Switch Setting - Konica Minolta BIZHUB 350 User Manual

10

To specify a software switch setting

1
Enter Administrator mode, and then touch [Admin. 2].
2
Touch [Software SW].
3
Touch [Mode Selection], and then
type in the mode number using the
keypad.
4
Specify the mode setting using either
bit selection or HEX selection.
– To specify in bit values, touch [Bit
Selection], touch
move the cursor to the bit to be
changed, type in the value using
the keypad, and then touch
[Enter].
– To specify in hexadecimal values,
touch [HEX Selection], specify
the value by using the keypad
and touching [A]—[F], and then
touch [Enter].
10-30
Specifying management settings
or to
bizhub 350/250 (Phase 2.5)