Xerox Phaser 8400 Service Manual page 72

POST Error Reporting Blink Pattern Definition Table (Continued)
8400
Control PS, PE and
Panel Control
Error Panel LEDs
Code (for 8400)
08.01 Flutter only
09.01 Flutter only
10.01 Flutter and
then 10
blinks
10.02 Flutter only
11.01 Flutter and
then 11
blinks
11.02 Flutter and
then 11
blinks
11.03 Flutter and
then 11
blinks
11.04 Flutter and
then 11
blinks
12.xx Flutter only
13.01 Flutter and
then 13
blinks
13.02 Flutter and
then 13
blinks
14.xx Flutter and
then 14
blinks
3-6
POST
Error
Type Description
Soft Control Panel failed to initialize, POST soft
error.
Soft Control Panel data path failure, bad data
returned.
Hard PLD power control link down.
Soft PLD power control link invalid, mismatch
error.
Hard EEPROM read failure.
1. Check EEPROM orientation.
2. Replace EEPROM.
Hard EEPROM write failure.
1. Check EEPROM orientation.
2. Replace EEPROM.
Hard EEPROM re-read failure.
1. Check EEPROM orientation.
2. Replace EEPROM.
Hard EEPROM data failure, mismatch error.
1. Check EEPROM orientation.
2. Replace EEPROM.
Soft Configuration card test failure.
1. Check card orientation.
2. Reseat then replace the configuration
card.
NOTE: Printer will work as a base model
(without networking) without the
configuration card (8400 only).
Hard PHY reset failure, reset stuck low.
Hard PHY ID error, mismatch error.
Hard USB ASIC test errors, N2280 netchip read,
write, and mismatch errors, POST hard
errors.
Phaser 8400/8500/8550 Color Printer
8500/
8550
Control
Panel
Error
Code
16.3
16.4
33.1
33.2
12.1
12.2
12.3
12.4
2.1
2.2
19.1