X-Axis
Shaft
X-Axis or lateral movement of the printhead is accomplished using a stepper motor
driving a fine-thread screw system. The printhead, mounted to the X-Axis shaft,
moves laterally across the surface of the drum.
To find the printhead home position, the X-Axis system drives the printhead in an
open-loop. The printhead is driven against the left printer frame for a few seconds,
and then reversed a set distance. A tension spring links to the printhead's left shaft and
provides a preloaded tension to allow the printhead to move smoothly.
Theory of Operation
X-Axis Hook
Tension Spring
Drum
Printhead
X-Axis
Shaft
Nose
X-Axis
Cone
Motor
Gear
s8500-014
2-9