Functional Specifications; Electrical Specifications; Environmental Specifications - Xerox Phaser 8400 Service Manual

Functional Specifications

Characteristic
Printing Process
Color Medium
Operating Modes and
Resolutions
Maximum Operating
Printing Speed
First-Print-Out
(in seconds, Letter/A4)
Warm-Up Time:
From Off (cold start)
From Power Saver

Electrical Specifications

Characteristic
Primary line voltages
Primary line voltage
frequency range
Power consumption
E S ®
NERGY TAR

Environmental Specifications

Nominal Operating Environment
Temperature
Humidity
General Information
Solid-ink
Yellow, cyan, magenta, and black ink sticks, each shape-coded. The
printer uses the subtractive color system to produce the colors red,
green, and blue.
(8400)
Fast Color (300x300 dpi), Standard (300x450 dpi), Enhanced
(563x400 dpi), High Resolution/Photo (525x2400)
(8500/8550)
Fast Color (225 x 400 dpi), Standard (300x450 dpi), Enhanced (525
x 400 dpi), High Resolution/Photo (525x2400)
24 ppm (8400 and 8500 series)
30 ppm (8550 series)
As low as 6 seconds
12 minutes (8400), 15 minutes (8500/8550)
4 minutes
Specification
115 Volt
90 - 140 VAC
47 - 63 Hz
1250 W (peak) - 1000 typical
180 W (idle)
230 W (average during printing)
43 W
10º - 32º C (50º - 90º F) operating
20º - 25º C (68º - 77º F) Best jam performance
10% - 80% RH Non-Condensing operating
Specification
230 Volt
180 - 264 VAC
47 - 63 Hz
1250 W (peak) 1000 typical
180 W (idle)
230 W (average during printing)
43 W
1-11