X-Axis Motor Assembly - Xerox Phaser 8400 Service Manual

X-Axis Motor Assembly

(PL 4.5)
1.
Remove the Right Side Cover from the printer (see page 8-6).
2. Disconnect the wiring harness.
3. Remove four screws securing the motor to the chassis and remove the motor.
Side Rail
Replacement Note:
Note
When reinstalling the X-Axis motor, ensure that the fork, extending out from the
side of the cone nut on the motor shaft, is engaged with the side rail.
Service Parts Disassembly
X-Axis Motor
s8500-108
8-53