4.9.3 Port Classification
This page allows you to configure the basic QoS Ingress Classification settings for all switch ports. The Port Classification
screen in
Figure 4-9-2
appears.
The page includes the following fields:
Object
• Port
• QoS Class
• DP Level
•
PCP
•
DEI
•
Tag Class
•
DSCP Based
Figure 4-9-2 QoS Ingress Port Classification page screenshot
Description
The port number for which the configuration below applies.
Controls the default QoS class, i.e., the QoS class for frames not classified in any
other way. There is a one to one mapping between QoS class, queue and priority.
A QoS class of 0 (zero) has the lowest priority.
Controls the default DP level, i.e., the DP level for frames not classified in any
other way.
Controls the default PCP for untagged frames.
Controls the default DEI for untagged frames.
Shows the classification mode for tagged frames on this port.
Disabled: Use default QoS class and DP level for tagged frames.
Enabled: Use mapped versions of PCP and DEI for tagged frames.
Click on the mode in order to configure the mode and/or mapping.
For more detail information, please refer to chapter 4.9.3.1.
Click to Enable DSCP Based QoS Ingress Port Classification.
User's Manual of WGSD-10020 Series
177