7810iR-ent Internet/Intranet Alarm Receiver Installation and Setup Guide
Programming Automation Options
Action
1. From the Home Screen, navigate to the
Central Station Setup Screen:
Enter Authorized Code.
2. After the Authorized Code has been
verified,
3. Touch Auto Opt tab.
There are three possible configurations for
Automation. Refer to the appropriate
section of this document for a detailed
discussion of each configuration.
4a. In Manual Mode, the 7810iR-ent
functions as a standalone unit. RX Line
Number and VPN enable can be selected.
However, they will not effect how the unit
works.
4-32
Screen Display