Table of Contents
Advertisement
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Message Formats
There are two categories of messages that are sent by AlarmNet to the Central Station.
Subscriber Messages – indicate alarm or trouble conditions at the subscriber premises,
•
or identify issues with the subscriber radio, the 7845i-ent Graphical User Interface, that
is enabled for Internet reporting or that may need attention. Subscriber messages can be
sent in one of two formats; ADEMCO high-speed or Contact ID
Network Messages – indicate specific conditions with the AlarmNet network, central
•
station transceivers, and or subscribers. Network messages are sent in ADEMCO high-
speed ONLY and may include messages for subscribers # 0000 or # 0001
ADEMCO Contact ID Format
Consists of:
A 4-digit subscriber ID
•
A 'qualifier' that indicates whether the message is an event or a restoral
•
An event code indicating the type of AlarmNet
•
An optional partition number
•
The exact zone or user number that initiated the report
•
How Contact ID is Displayed on the 7810iR-ent
How Contact ID is Displayed on the 685 Receiver when using LRR Line Card Mode
S E C T I O N
Message Formats
6
6-1
Hide quick links:
Advertisement
Table of Contents
